Train pump ops anywhere, no apparatus required
The only virtual simulator that models real pump mechanics and hydraulics. Get the reps in at the firehouse, at home, or on the road. Connect hydrants, static sources, relays, and hose configurations, practice any scenario, and review every decision.
See the pump panel you'll actually train on
A full virtual fire pump operator panel: discharge pressure gauges, intake pressure, throttle and RPM, individual line valves, and water source controls for hydrant, static source, and relay configurations. Every gauge responds to real hydraulic physics, so what you practice here behaves the way the real pump does on the fireground.
The Fire Pump Simulator runs in any modern browser. No install, no kit, no engine to warm up. Train pump operators on real-world scenarios anytime, with every action timed and logged for review.
Built for the fire protection industry
Every feature is purpose-built for fire pump operator training, not adapted from a generic platform.
Realistic hydraulic simulation
Physics-based pump curves, pressure dynamics, and flow mechanics, not simplified approximations. The simulator responds the way a real pump does.
Configurable water sources
Connect to hydrants, static sources, relay setups, and hose configurations. Use built-in presets or build your own custom scenario from scratch.
Full session tracking
Every valve turn, pressure change, and operator action is recorded with timing. Review exactly what happened, in sequence, after every session.
How it works
From setup to scored results in minutes.
Configure your scenario
Pick a water source (hydrant, static source, or relay), set your hose configuration, and choose a preset or define your own.
Operate the pump
Work through the interactive pump controls. Real pressure feedback, real hydraulic behavior, no shortcuts.
Review your session
Every event is timestamped and saved. See where pressure changed, what you did, and how long each action took.
Everything you need to train with confidence
Fire Pump Simulator covers the complete pump operation workflow, from source configuration to flow, with every decision recorded so you can review and improve.
- Hydrant, static source, relay, and hose configurations
- Built-in scenario presets
- Custom scenario builder
- Live fire loads: five fire types that grow with too little flow, darken down with enough, and rekindle if you quit early
- Foam operations with in-line eductors and concentrate pails
- JPR self-tests: NFPA 1002 evolutions you run from memory
- Live sessions: invite viewers to watch your run in real time, with built-in chat
- Full session recording with event-level timing
- Session replay and performance review
- US and metric unit support
- Self-paced courses with quizzes, sim tasks, and a completion certificate
- Free fireground calculators: pump discharge pressure, friction loss
Test yourself, no prompts
Once the theory sticks, run real NFPA 1002 pump evolutions from memory on a freshly cold rig. No step-by-step prompts, just you and the panel. Every attempt is scored and saved to your training record, so take a JPR on as many times as it takes to prove the procedure stuck and watch your pass rate climb.
- Produce a handline at correct PDP
- Supply two handlines
- Produce a master stream (deck gun)
- Establish a hydrant supply
- Draft from a static source
- Relay pumping
- Foam fire stream
Sharpen the knowledge behind the panel
The simulator builds your hands at the pump. Built-in quizzes and flashcards keep the written knowledge sharp: pump theory, hydraulics, friction loss, and water supply. Studying for certification? Start with the NFPA 1002 practice test.
Practice quizzes
Build a custom quiz from the question bank, pick how many questions, and choose immediate or end-of-quiz feedback. Every attempt is saved so you can see your progress over time.
Flashcards
Flip through the question bank one card at a time to drill recall and speed. Cards reshuffle on every run, so you learn the material, not the order.
Sharpen your skills with a self-paced course
Hands-on training built around the simulator. Read the chapter, run the sim task, pass the quiz, earn a certificate.
Ready to start stacking reps?
Train anywhere, anytime. Free to start, no credit card required.
Create free account